Frozen Desserts & Ice Cream

Ice cream is a frozen dairy product usually manufactured by freezing a mix stirred slowly to incorporate air, prevent large crystals formation, and ensuring a smooth texture.

The main objectives for using stabilizers in ice cream are to produce smoothness in body and texture, reduction in ice and lactose crystal growth during storage especially during heat shock, and to provide consistency to the product and opposition to melting shock.

Stabilizers added to ice cream perform numerous important functions, such as reduced whipping time, controlled fat destabilization, improved dryness, and increased resistance to melting and shrinkage

Замороженные десерты_Из крема_Гидроколлоиды Поставщик Производитель в Китае
Stabilizer Blends

Gino offers a series of emulsifier and stabilizer blends (systems), tailored to meet the specific demands of Frozen Desserts & ice creams, and ice-lollies.

They are made from a combination of emulsifiers and hydrocolloids which are derived from red seaweed and other plant sources,

In certain (typically high-fat) foods like ice cream, it thickens, binds and stabilizes, a.k.a. keeps ingredients from separating.

It's also what gives your scoop a smooth consistency, and is packaged and low-fat foods, it makes them taste better.

  • Improved form stability
  • Production stability
  • Improved melt-down properties
  • Enhanced sensory properties
  • Prevention of heat-shock
  • Retard the formation of large ice crystals and large fat globules
  • Improves texture and shelf life of ice cream.
Items Specifications Test results
Внешний вид Off white to yellowish powder Квалифицированный
Moisture (105?) ? 10 % 6.7
Total Ash  (550?) 4.7 - 7.5  w/% 5.6
Viscosity (1.5%, 75?) 1000 - 2100 mPa·s 2075
pH?1.5%w/w, 55?? 7 - 9 7.5
Свинец (Pb) Max 2 ppm Квалифицированный
Мышьяк (As) Max 2 ppm Квалифицированный
Общее количество пластин Max 20,000 CFU/g 400
Дрожжи и плесень Max 1,000 CFU/g Квалифицированный
кишечная палочка Absent in 5 g Квалифицированный
Сальмонелла Отсутствует в 25 г Квалифицированный
stability test results

The quantity of stabilizer and emulsifier required for different variety of ice cream differs based on the total solids, fat content, desired overrun etc.

As the fat level decreases, the amount of stabilizer/emulsifier concentration increases.

The reason is mainly attributed to decreased total solids content resulting in increased water concentration in the formulation.

As a result to attract water molecules in more numbers and to decrease bigger ice crystal formation, stabilizer/emulsifiers are added in more quantity (Arbuckle, 1986).

Examples of the approximate composition of some typical ice creams.

Product Milk Fat (%) Solids not Fat (%) Sweeteners (%) Stabilizers and Emulsifiers (%) Total Solids (%)
Non fat ice cream (hard)  < 0.8 12 - 14 18 - 22 1.0 35-37
Low fat ice cream (hard) 2-4 12-14 18-21 0.8 35-38
Light ice cream (hard) 5-6 11-12 18-20 0.6 35-38
Economy ice cream 10-12 10-11 15 0.5 35-37
Frozen yoghurt 3-6 8-13 15-17 0.5 30-33
Soft serve ice cream 3-4 12-14 13-16 0.4 29-31
Источник

Stabilizers afford functionalities that include: 

  • increased stiffness;
  • provide a slower and more uniform meltdown;
  • enhance whip ability during aeration;
  • prevent lactose crystallization;
  • prevent shrinkage during storage;
  • stabilize the emulsion;
  • contribute to body, texture, and creaminess.

Since all these properties cannot be met by a single hydrocolloid, it is always necessary for a stabilizer manufacturer to go for a blend that can meet the needs of the ice cream manufacturer.

Не могу Найдите свое приложение?!

Как один из профессиональных и опытных поставщиков и производителей в Китае,

Наши технические представители по продажам могут помочь в разработке продукта и предложить решения по текстуре

в таких распространенных областях, как выпечка, молочные продукты, мясо и птица, заправки, соусы и кондитерские изделия.

ru_RURussian
?????????? ?????

Получить Эксклюзив

Новости, Ресурсы

Подробнее о том, что вы получите от нашей рассылки!

  • Технические документы, статьи и видеоматериалы по текстуре и стабильности пищевых продуктов;
  • Новейшие пищевые тенденции, требования потребителей и инновации в текстурировании;
  • Правильная система пищевых жевательных резинок и стабилизаторов, которая решит вашу проблему;
  • Команда, способная справиться со всеми сложностями и помочь вам разработать продукты;
  • Критерии и методы выбора поставщиков и другие навыки закупок.

Подпишитесь на рассылку, чтобы узнать секрет лучшей и здоровой жизни!